- Shipping Company Estimated Delivery Time Shipping Cost
- This item cannot be shipped at your location
Highlights
Enclosure Heated Up to 60°C
The printer's enclosure is thermo-regulated and can heat up to 60°C which makes it a real advantage for printing technical materials requiring heat such as ABS.
Incredible Print Speed
Enhance your production and printing with a maximum print speed of up to 600 mm/s and enjoy acceleration that takes your productivity to the next level.
Revolutionary Multi-colour Printing
Thanks to support from The Creality CFS (Color Filament System) can now use up to 16 different colors in a single printing process.
New Apus Extruder
Discover the new all-metal APUS extruder and the new high-quality CFS-compatible technology for multi-color and continuous printing.
High Print Volume
The Creality K2 Plus Combo boasts an impressive print volume of 350 x 350 x 350 mm, enabling you to produce large-format objects or several smaller models simultaneously.
Automatic Leveling and Compensation
The Creality K2 Plus Combo uses two optical distance sensors on the Z axis. The whole process is automated without you having to worry about it. What's more, the aluminum heating bed is 5 mm thick and not easily deformed, ensuring accurate leveling.
Dual AI Cameras
Easily control and monitor your printing projects using the integrated AI camera, which enables precise monitoring of printing progress. This feature not only facilitates the operating process but also increases the reliability and quality of print results.
K2 Plus Combo Next-level Professional 3D Printer
Epic Leap of Color & Size
- Intelligent CFS
- 350*350*350mm Cubed Print Size
- Step-servo Motor System
Intelligent Management of Multiple Filaments
- Auto Identification & Mapping
- Auto Run-out/Tangle Detection
- Auto Filament Switch Relay
- Moisture-proof Filament Storage
- Spring-loaded Batten Bar
- Cardboard Spool Compatibility
16 Colors Level Up Your Creativity
The CFS comes with a connection hub on the back. By hooking up as many as four CFS units together, you are able to print in the splendor of 16 colors. Saves the need for extra painting afterward.
Dual Z-axis Assisted by 4 Linear Rods
Extremely steady while carrying the print bed up and down. Virtually no layer shift.
5mm Thick Aluminum Alloy Heatbed
Holding exceptionally well against deformation and vibration.
Cutting-edge Step-servo Motor
- Smooth and responsive motion
- Less average load for extended service life
- Minimal heat emission reducing failure rate
Incredibly Quiet While Printing Hard
The working noise of K2 Plus is only 45dB, which is credited to the virtue of step-servo motors, dynamically balanced fans, and a snug enclosure It is no louder than someone typing on a laptop PC, truly a creative machine you can work next to.
Blazing Speed, a New Record
For a large-format machine,600mm/s is pretty fast, but that's not the whole story. Turbocharged by the step-servo motors, it can accelerate at a staggering 30000mm/s2.
Active Belt Tensioning
Timing belts may get loose over time, leading to poor print quality and accuracy. On the K2 Plus, the belt tension is checked and rigged actively by a pressure sensor instead of manually. Now, belt tensioning is a thing you can forget about.
Automated Run-out Sensor Filament Cutter
The steel-bladed cutter features a magnetic retraction mechanism for precise filament positioning and minimal waste, with an indicator to replace the filament when only one inch remains.
Next-gen Direct Drive Extruder
So Many Features Neatly Packed
40mm3/s High-flow Hotend
Powered by a 100W heater, the flow rate of ABS at 280C can reach 40mm3/s, 66% higher than the previous design.
Actively Heated Chamber High-temp Nozzle with Hardened Steel Tip
Empowering More Use Scenarios Phenomenal Print Quality
Two Auxiliary Fans Set the Style Right Off
The part cooling airflow is nearly doubled with two auxiliary cooling fans installed on both sides of the chamber, ensuring model shapes and details are set before any stringing or warping occurs.
Chamber Al Camera Keeps a Keen Watch
K2 Plus uses an Al camera on the chamber side to watch over spaghetti failure, foreign objects, and idling. etc. It will alert you when an error occurs. It also supports real-time monitoring and time-lapse filming.
Ingenious Anti-tilt Auto Leveling
K2 Plus features dual independently motorized Z-axes for automatic tilt reduction, strain gauge-based auto-leveling compensation, and a pro-level first layer capability that ensures a smooth and neat initial layer without manual intervention.
Smarter Software for a Seamless Workflow
The latest Creality OS will unlock the full power of your 3D printer. It features smart multi-filament management and allows for fine-tuning in expert mode or with root access. FLUIDD WebUl is also supported for your convenience.
User-friendly Like a Household Appliance
K2 Plus is pre-assembled, so you can use it right after unpacking and screen installation. Then, a boot-up quick guide covers self-tests.
Awesome Features
- Air Purifier
- Built-in RFID Tag Reader
- Ethernet+Dual-band Wifi 32G EMMC
Specification
| General | Brand: Creality Type: 3D Printer Model: K2 Plus Combo Color: Gray |
| Specification | Printing Technology: FDM File Transfer: USB drive/ethernet/WiFi Build Volume: 350*350*350mm Rated Voltage: 100-240V- AC 50/60Hz Display Screen: 4.3" color touchscreen Rated Power: 1200W Supported Filaments: PLA/ABS/PETG/PA-CF/PET-CF... Monitoring AI Camera: Yes Calibration AI Camera: Yes Filament Run-out Sensor: Yes Printing Speed: ≤600mm/s Auto Filament Backup: Yes Acceleration: ≤30000mm/s² Filament Tangle Sensor: Yes Printing Accuracy: 100mm±0.1mm Air Purifier: Yes Layer Height: 0.05-0.3mm Input Shaping (G-Sensor): Yes Extruder: Apus dual-gear direct drive extruder Lighting: Yes Filament Diameter: 1.75mm Auto Bed Tilt Calibration: Yes Nozzle Diameter: 0.4mm Slicing Software: Creality Print5.0 Nozzle Temperature: ≤350°C Max Filament Spools: 4 [Single CFS] Heatbed Temperature: ≤120°C Active Chamber Heater: Yes Chamber Temperature: ≤60°C RFID Filament: Optional Build Plate: Flexible build plate Support File Formats: G-code Leveling Mode: Anti-tilt auto-leveling CFS: Yes XYZE Motor: Step-servo Motor Max CFS Connection: ≤4 UI Languages: English, Spanish, German, French, , Portuguese, Italian, Turkish, Japanese, Chinese |
| Weight & Size | Product Weight: 38.5kg Package Weight: 51kg Product Size(L x W x H): 43.5x46.2x52.6cm Package Size(L x W x H): 62x59x71cm |
| Package Contents | 1 x 3D Printer 1 x Touch Screen 1 x Screen Base 1 x Spool Holder 1 x Filament 1 x PTFE Tube 1 x Tool Box 1 x Quick Guide 1 x After-sales Services Card 1 x Nozzle Cleaner 1 x Cutting Plier 1 x Scraper 1 x USB Flash Disk 1 x Screwdriver Bits Kit 1 x Universal Handle 1 x Hexagonal Wrench 1 x Socket Spanner 1 x Lubricating Grease 1 x Glue Stick 1 x Unboxing Wrench |
Customer Photos
Customer Videos
Customer Reviews
Questions & Answers
FAQ
What are its key differences from K1/K1 Max?
K2 Plus is the highest edition in the 2nd generation of K series flagship 3D printers. It offers an ultra-large build volume of 350*350*350mm and features the latest APUS extruder, a closed-loop motor system, an active chamber heater, etc. It supports the intelligent CFS unit for multi-color 3D printing and automatic filament backup.
Is CFS any good to me besides multi-color 3D printing?
CFS is actually an intelligent filament management system. It enables automatic filament loading and unloading in addition to multi-color 3D printing. So, it can save you the troubles of filament replacement. When the filament backup function is on, if the current filament spool is running out, it can continue by selecting and loading another spool automatically. It also makes a well-sealed drying box that you can store filaments for a long time.
How is the auto leveling of K2 Plus?
K2 Plus uses two optical distance sensors on the Z-axis for auto tilt adjustment and a strain gauge in the printhead for auto leveling. So it can ensure accurate leveling with less compensation. The whole process is automated without your attention. Moreover, the aluminum heatbed is 5mm thick and hard to deform, so the leveling accuracy can be well guaranteed.
The heatbed is so big. Is it heating fast and safe?
The K2 Plus heatbed adopts an 800W high-power AC heating system with double safeguards. For one, there is an overheating fuse under the heatbed which will automatically disconnect in overheating. There is also a fuse in the machine body. When an unexpected situation occurs, it will disconnect to ensure safety.
Does K1 series/Ender-3 V3 series support CFS?
Not yet. To make the K1 and Ender-3 V3 series compatible with CFS, you need to upgrade the extruder. Currently, we are working hard on the multicolor upgrade kit for them, which may include CFS, CFS power adapter, a new extruder with a cutter, a nozzle wiping module, and new firmware. This is a huge project. The Upgrade Kit will not be available in the short term.
What filaments does CFS support?
CFS can use any flament spools with a diameter of 197-202mm. Creality paper spools are compatible. CFS supports most filaments such as PLA/PETG /ABS/ASA/PA-CF, but not with flexible filaments such as TPU and damp PVA/BVOH.
Does CFS support TPU?
No, CFS does not support TPU. To print with TPU, you can install it on the standard spool holder of K2 Plus.
How many AI cameras does K2 Plus have?
K2 Plus has two cameras. One is located close to the nozzle. It is used for flow rate and PA(Pressure Advance)calibration. Another is attached to the front frame. It is used for video monitoring and print failure detection.
